OPPO F21 Pro Durability Test
Oppo F21 Pro in the water gently put the phone here the phone is beautiful to look at
Today there are about 40 litres of water here. I can't tell exactly, but there will be around 40 to 45 litres of water.
We will perform a five-minute test. till then, we wait Let's see what happens with this phone. 5 minutes have passed Let's take the phone out of the water.
And now my hand is near the phone. Finally here is the phone
Let's check out the SIM Tray.
Hopefully, there should be liquid here too. because There is no gasket protection installed here. And yes The liquid appears on the inside of the SIM tray.
that means there is liquid inside this phone You can see that a lot of liquid has come out of this phone. So clearly, you should keep this phone away from liquid.
Do you know when and what problem will arise due to the liquid in the phone?
Let's start first with the SIM Tray. It looks like plastic was used here.
Both inside and outside, plastic has been used.
Will the sim tray break by accidentally bending?
I think so. Here the sim tray is damaged quite easily.
And as soon as I fix this.
Hopefully, it should break from here. The SIM tray is stuck here quite lightly.
If we apply even a little bit of extreme pressure, the SIM tray can easily be damaged.
Here a frame made of plastic has been used.
The buttons are also made of plastic here.
Will the buttons come out by accidentally applying pressure?
Buttons are coming out, but you have to apply a lot of pressure.
Let's check out the camera setup.
It looks like there is a metal frame here too.
here is the glass
The frame used on the camera is aluminium.
And have a paint job on top of it.
The same colour has been used in the frame of the camera and the frame of the phone.
that's why
That's why you will be confused about whether it is metal or plastic.
A plastic circular ring is given around this microscopic lens.
It will most likely be damaged by coming in contact with a sharp object.
But it shouldn't cause any issue with functionality.
About the earpiece grill
Hopefully, this should also be plastic.
It's made of hard plastic.
And about the glass quality.
If we test the display
The scratch pattern here is quite similar and expected.
No scratches are falling here till level 5.
Scratches are minor at level 6.
And at Level 7, the scratches are getting deeper.
That means
Most of the common
Soft metal objects
like
Gold
Silver
Aluminium, Manganese
All these should not leave any scratch on this display.
Moving on the backside
Here fibreglass has been used.
If we see the pattern of scratch here
from the level 2
3
4
5
6
7 and beyond
Scratches are happening here on every scale.
That means every kind of metal can scratch this back panel quite easily.
including wood too
On the camera frame
Gorilla Glass 5 has also been used on this glass module.
even on the camera lens
And, also around this LED Flash
No scratches till level 5
Scratches are getting minor and deeper at levels 6 and 7.
Time for the bend test.
Here is the plastic frame.
Not the metal
Is it really strong?
First, we bend from the screen side.
Three
Two
One
There is a slight flex in the phone.
But no major damage is visible on the phone.
Try to bend from the opposite direction.
Three
Two
One
Eight finger pressure
Again
No such damage
The phone is perfectly intact.
And no damage is visible on the phone.
Time for the Drop test.
Before that, let me show you that it has been almost 6 to 7 hours since I performed the liquid test on the phone.
We did the test at 12 o'clock in the night.
Now it's half past six in the morning.
I'm a bit late.
It is quite strange that there was a lot of liquid inside the phone, but still, no problem has come to the phone.
The camera lens, display, everything is fine.
Here the protection of Gorilla Glass 5 is given.
If you go to Pro 5G, there is a short sensation.
So let's start the test.
It's a bluff master.
We thought it was a metal frame, but it is plastic.
Ok
First
with the two feet height
Three
Two
One
There is no moisture on the front camera.
is perfectly working
Let's try from the camera side.
Also, try a corner angle.
Perfect
No problem
Rear side
Fibreglass is given here.
I think there should be no damage here.
Flat
The camera lens is ok.
The shock in the display did nothing.
Let's try from the display side.
From the two feet
pocket height
Three
Two
One
Nothing
everything is perfect
alright
Increases the height.
if you are talking on the phone
And almost from this height, your phone falls.
Three
Two
One
Now the phone fell from this side from the corner.
The impact happened from here, and this plastic got buried a bit.
Let's try from the side of the camera.
Three
Two
One
This time again fell from the corner.
This time it fell from the other side of the corner.
Second last drop test
Does the shock damage the display when the phone falls from the rear side or not?
Ok
Three
Two
One
Nothing
The phone is fine so far.
If the phone survives, then the reason would be that the phone is lightweight.
Also, there is the protection of gorilla glass five as well.
Last drop test
From the 5.5 feet height
And straight display side.
Three
Two
One
so far, so good
The phone is working perfectly.
It's a marketing gimmick.
It is being called fibreglass, but it can be scratched quite easily here.
It can be easily scratched by plastic or any sharp object.
Wait for the full review.
Thank you so much, guys.
.jpg)
.jpg)
No comments:
Post a Comment